Dipl.-Ing. Ulrich Jahnke successfully passed his doctoral examination with his dissertation on “Systematics for Preventive Protection against Product Piracy by Additive Manufacturing Methods” on March 19, 2019.
On the 20th & 21st of February the DMRC again hosted a Technical-Meeting and Board-Meeting for all partners at Paderborn University. Besides the presentation of current and future research endeavors, decisions on DMRC strategy were made.
Lena Risse was recently awarded the "Junior Prize" of the German Association for Materials Research and Testing (DVM) in Berlin during the third conference "Additive manufactured components and structures".
The Clean Sky project "Research of Innovative and Breakthrough Additive Manufactured leading-edge concept" (RIB-AM) started in November with a kick-off meeting at the CATEC (Center for Advanced Aerospace Technologies) in Seville. Clean Sky Joint Undertaking is a public-private partnership between the European Commission and the European aeronautics industry that coordinates and funds research activities to deliver significantly quieter and more…
M. Sc. Mehmet Esat Aydin?z has successfully passed his doctoral examination with his thesis on ?Microstructural and mechanical properties of laser melted Inconel 718 Nickel-based superalloy“, on November 30, 2018.
Gemeinsam mit Partnern der RWTH Aachen erhielten Dr. Oliver Strube und David Wedeg?rtner vom ILH den AVK Innovationspreis 2018 in der Kategorie Wissenschaft für die Entwicklung einer biomimetischen Bikomponentenfaser.
In Oct.18 started with proDruck “3D printing – Technology of industry 4.0 – as a medium for inclusion of people with disabilities in the work would” a new research project at the University Paderborn. The project is with 1.4M. � funded by the BMBF.
Zum 15. Mal wurde von der Jowat SE in Detmold der Forschungspreis für innovative Klebstofftechnologien verliehen. Diesj?hriger Preistr?ger ist Dr.-Ing. Matthias Hopp, Oberingenieur der Kunststofftechnik Paderborn (KTP), die Gründungsmitglied des Instituts für Leichtbau ist.
Dr.-Ing. Hopp erhielt den Preis für seine Dissertation ?Verfahrenstechnische Entwicklung zum Kleben von WPC für Anwendungsgebiete aus dem Holz-/Kunststoffbereich“. WPC…
Among 191 published papers of this year's Solid Freeform Fabrication in Austin, 7 received the award "Broader Impact". These included two DMRC publications.
For the first time since the existence of the Direct Manufacturing Research Center (DMRC), all DMRC members met with one of the industrial partners outside Paderborn. Host was from 18.09. until 20.09. in Celle the company Baker & Hughes.
Photo (University of Paderborn, Kamil Glabica): Looking forward to supporting a new project on AM (from left): Prof. Dr.-Ing. Volker Sch?ppner (Vice President for Teaching, Studies and Quality Management at the Paderborn University), Marianne Thomann-Stahl (District President of the Detmold District), Simone Probst (Vice President for Economic and Personnel Planning at the Paderborn University), Prof. Dr.-Ing. Mirko Schaper (Dean of the Faculty of Mechanical Engineering at the Paderborn University) and Dr.-Ing. Christian-Friedrich Lindemann (Managing Director of the DMRC)
With 5.34 million euros, the state of North Rhine-Westphalia and the European Union are supporting a new research project of Paderborn University for the development of innovative, application-adapted materials for Additive Manufacturing.
Das NRW-Fortschrittskolleg ?Leicht – Effizient – Mobil“ der Universit?t Paderborn veranstaltet am Mittwoch, 26. September, ab 13.30 Uhr im Q-Geb?ude der Universit?t seine diesj?hrige Denkschule zum Thema Mobilit?t.
In drei moderierten 360直播吧s zu verschiedenen Aspekten von Mobilit?t kommen gesellschaftliche Akteure, Experten aus der Praxis sowie Wissenschaftler zusammen, um über Ans?tze zur Bew?ltigung der gro?en gesellschaftlichen…
From August 13-15, 2018 the 29th Annual International Solid Freeform Fabrication Symposium (SFF) takes place in Austin, Texas. With 620 participants from 18 countries and 500 presentations on current topics, this is one of the largest conferences in the field of additive manufacturing worldwide.
The DMRC is also represented here with numerous lectures on the following topics:
The Influence of Contour Scanning Parameters and Strategy on…
The Direct Manufacturing Research Center (DMRC) is involved in the training of engineers in the field of additive manufacturing for the second time in 2018. The "Additive Manufacturing Specialist VDI" is a practice-oriented qualification developed by the German Association of Engineers (VDI) together with experts from the additive manufacturing industry. It includes the attendance of seven seminar modules and concludes with a VDI certificate…
Being part of a network offers many advantages and opens up new perspectives. Technology transfer and industrial cooperation have a high priority at the University of Paderborn. In the ILH and the PIAF, there are long-standing contacts to companies of different sizes, regionally and nationwide.
